Cfadisk Usb Driver X64

by

Download the 64bit Hitachi Microdrive driver cfadisk-x64-1.zip. Once installed you should see the USB device show up as a 'Disk Drive'. Guide to Mount SD Card as HardDisk. Similar Threads. Is there a very simple way to get the RT to recognize SD card in Libraries?

Notes on the Developer version (these do not apply to the latest Consumer version which does work): The 2011 Developer preview worked fine for me on the non-public 64-bit Server version (image 3), but the 64-bit Desktop version which anyone can publicly download did not seem to boot (it just got stuck detecting hardware for 4 hours on my Asus 1011PX N455 Atom netbook until I gave up and switched it off). Aleksandra radovic beskrajno. I tried this same 64-bit Desktop version both on a USB HDD and a USB Flash drive. I also had problems with ImageX when Applying the wim file to a USB IDE 2.5' hard disk (I used two different USB disks and caddies - Windows 7 reported delayed write errors). The 32-bit version works, though I could not get IE to run without erroring! This method of using ImageX /Apply on a USB 2.0 flash drive can take at least 40mins (Lexar 16GB USB2.0 Jumpdrive), but on a USB HDD or a USB 3.0 Flash drive and USB 3.0 USB port only about 10 minutes for the 32-bit Desktop version. Therefore a USB HDD disk or USB 3.0 Flash drive is recommended (unless you have plenty of time to spare!). IMPORTANT: The USB drive must have an Active (bootable) partition.

Usb

Use RMPrepUSB to prepare the USB drive or use DISKPART to make the partition is bootable. To check, use RMPrepUSB - Drive Info and check it is listed as 'ACTIVE'.