Installupdate Libnl-1.0pre8 Or Later
Contents • • • • • • • • • • • • • hostapd Linux documentation page About hostapd Homepage: hostapd is an IEEE 802.11 AP and IEEE 802.1X/WPA/WPA2/EAP/RADIUS Authenticator. This page is dedicated to the Linux documentation of it's implementation and use. Aplikasi koperasi simpan pinjam xls download. Please refer to the hostapd home page for information for other Operating Systems. As far a Linux is concerned, out of the old drivers you can only use these 3 drivers with hostapd: • • • All new mac80211 based drivers that implement AP functionality are supported with hostapd's driver.
If your distribution ships 0.6.8 or later, you can test with this bare minimum config by creating the file hostapd-minimal.conf. You need to install/update libnl-1.0pre8 (or later). If all goes well and the compilation finishes, try the minimal hostapd again, see the section Using your distributions hostapd above for that. It is advisable to try your distributions version of hostapd before taking the time to compile and install your own copy. This will make future maintenance easier as you'll be able to use the init scripts shipped by the distro and hostapd will be updated by it as well. If your distribution ships 0.6.8 or later, you can test with this bare.
The mac80211 subsystem moves all aspects of master mode into user space. It depends on hostapd to handle authenticating clients, setting encryption keys, establishing key rotation policy, and other aspects of the wireless infrastructure. Due to this, the old method of issuing 'iwconfig mode master' no longer works.
Userspace programs like hostapd now use netlink (the nl80211 driver) to create a master mode interface for your traffic and a monitor mode interface for receiving and transmitting management frames. Getting hostapd Using your distributions hostapd It is advisable to try your distributions version of hostapd before taking the time to compile and install your own copy. This will make future maintenance easier as you'll be able to use the init scripts shipped by the distro and hostapd will be updated by it as well. If your distribution ships 0.6.8 or later, you can test with this bare minimum hostapd.conf: interface=wlan0 #change this to your wireless device driver=nl80211 ssid=test If that config errors out with something like: hostapd $ sudo hostapd./hostapd.conf Configuration file:./hostapd.conf Line 2: invalid/unknown driver 'nl80211' 1 errors found in configuration file './hostapd.conf' that means that your distro is not shipping hostapd with nl80211 driver support and you'll need to follow the building instructions that follow.
If it works, you can skip down to the configuring hostapd section. If not, continue on. Ps2 rom sites.
Download and compile hostapd Using hostapd with nl80211 requires you to have at least libnl-1.0 pre8 as this release introduced genl, Generic Netlink, which nl80211 relies on. Most distributions are shipping this or a later release by now. To compile on fedora or other distibutions that separate out the headers from the binaries, you need the libnl-devel package. Throughout this section, versions will be referred to by: x.y.z ex: hostapd-0.6.8.tar.gz would be referred to as hostapd-x.y.z.tar.gz You can get the latest development version of hostapd from the git repository with: git clone git://w1.fi/srv/git/hostap.git cd hostap/hostapd Or you can get a stable release (0.6.8 or later reccomended) by downloading the tarball from. Wget tar xzvf hostapd-x.y.z.tar.gz cd hostapd-x.y.z/hostapd Next, we need to configure the hostapd build to enable nl80211 driver support. Copy defconfig to.config, and open it in your preferred text editor.
Also, there are other options that you may want to enable, like 802.11n support if your hardware can do it. Most of the other encryption types and features aren't needed for most applications, so if you're questioning if you need to enable it, you probably don't need to. Cp defconfig.config vi.config Now find this line: #CONFIG_DRIVER_NL80211=y and uncomment it by removing the '#' sign. Repeat for other settings that you may be interested in.