Manual Number 4330 Mitutoyo
The WT3-200 wire terminal pull tester is designed to measure the pull-off force of wire and tube terminations. An ergonomic lever allows for easy application of up to 200 lbF (1000 N) of pull force. Adjustable wire terminal grip contains multiple slots for wire diameters up to AWG 3 (0.25 in [6.3 mm]).
A large, backlit graphic LCD displays easy-to-read values, including real-time force, peak force, programmable pass/fail limits, units of measurement, and more. Data can be transferred to a PC or other data collector via USB, RS-232, Mitutoyo (Digimatic), or analog outputs. An analog load bar is shown on the display for graphical representation of applied force. On-board data storage for up to 1,000 readings is included, as are statistical calculations and output to a PC. Unique automatic output / data storage / zeroing upon sample break helps automate testing processes.
An optional ring terminal fixture may be used to secure ring terminations, and an optional carrying case makes transportation simple and safe. Part Number WT3002. • Measures real-time and peak force values • USB, RS-232, Mitutoyo (Digimatic), and analog outputs • 1,000-point data memory with statistics and outputs • Programmable set point indicators and outputs for pass/ fail determination • Configurable audio alarms and key tones • Ergonomic lever operation produces 200 lbF [1000 N] • Automatic output / data storage / zeroing upon sample break helps automate testing processes • Password protection prevents unauthorized changes • High-speed 7,000 Hz sampling rate accurately captures peak force values • Mounting holes for bench mounting. Accuracy ±0.2% of full scale Wire diameter range AWG30 - AWG 3 [0.03 - 0.25 in (0.8 - 6.3 mm)] Minimum sample length 7.50 in [191.0 mm], excluding termination Maximum sample elongation 1.15 in [29.2 mm] Power AC or rechargeable battery. Multi-step low battery indicator is displayed, gauge shuts off automatically when power is too low.
The 5i advanced digital force / torque indicator is designed to work with a wide range of Mark-10 remote force and torque sensors (see below). With exclusive Plug & TestTM technology, all calibration and configuration data is saved within the sensor's smart connector, not the indicator, allowing for true interchangeability.
Battery Life Backlight on: up to 7 hours of continuous use Backlight off: up to 24 hours of continuous use Sampling rate 7,000 Hz Outputs USB / RS-232: Configurable up to 115,200 baud. Mitutoyo (Digimatic): Serial BCD suitable for all Mitutoyo SPC-compatible Devices.
Analog: ±1V DC, ±0.25% of full scale at capacity. Contoh kertas kerja rancangan perniagaan. Configurable Settings Digital filters, outputs, automatic shutoff, default settings, passwords, key tones, audio alarms, backlight, calibration Safe overload 150% of full scale (display shows 'OVER' at 110% and above) Weight 16.0 lb [7.3 kg] Warranty 3 years (see individual statement for further details).
The 5i advanced digital force / torque indicator is designed to work with a wide range of Mark-10 remote force and torque sensors (see below). With exclusive Plug & TestTM technology, all calibration and configuration data is saved within the sensor's smart connector, not the indicator, allowing for true interchangeability. Sensor password protection prevents use of an unauthorized sensor. In addition, all sensors are fully compatible with the more basic 3i force / torque indicator.