Bully Dog Usb Driver

by

Description Free Shipping to all US addresses including Hawaii, Alaska, Virgin Islands, Guam, and Puerto Rico. Note: This unit works on all vehicles Bully Dog has calibration files for, both Diesel and Gas engines. URD lists the Toyota applications as we are primarily a Toyota Performance Company. Bully Dog’s GT Gas hand-held performance tuner gives drivers the edge they need, whether tackling tough terrain, pulling a heavy payload or maximizing fuel economy on the highway. Its sleek design, full-color display, and customizable gauges help track and adjust powertrain performance to deliver more horsepower and torque when it’s needed most. You can connect the GT Gas Tuner to your Windows PC to download the latest calibration files to keep your truck’s ECU up to date.

Download center or by ordering a CD ROM through a Bully Dog distributor. Plug Module into PC using a USB cable (Male A end for PC, Male B end for Module: Same.

The main unit can be removed after the ECU has been programmed with the new calibration file, or you can leave it and use it as a gauge displaying many scan tool functions like RPM, engine coolant temp, and so on. You can also use to read and clear codes. You can also remove the Bully Dog tune from your ECU and restore the factory Toyota calibration any time you wish.

How do I update my GT Tuner? Connect the Micro SD card using a card reader. Connect the GT with the Micro SD card installed by using a USB cable. Do not use the HDMI cable or the OBDII adapter plug to update the GT. Download and install the Update Agent application. • If it is already installed, skip to step 5. You can see if it is already installed by checking your Start Menu under All Programs.

The Update Agent will be listed under the Bully Dog Technologies folder: The following instructions are intended for Microsoft Windows computers. You can download the installation file at Run the application – you do not need to save it. Run the application. • If you have just installed it, the Agent may already be running. - You can show the Update Agent by right-clicking the icon in the system tray at the bottom right corner of your screen, and then clicking Show Agent.

- Or you can stop the previous instance of the Update Agent and open a new one – either option is a winner. • If you have already installed the application in the past, it should be listed under Bully Dog Technologies in your computer’s list of All Programs. Just double-click the Update Agent icon in that folder to let it start.

Let the Update Agent search and download available update files. Click the Update Button and let it write the update to the SD card. NOTE: This step varies depending on how you have connected the Bully Dog to your computer. • If you have the Micro SD card connected to the computer: - Disconnect it from the computer and put it in the GT. - Then turn the GT on by connecting it to a computer or to a vehicle and turning the key to the Run position.

Go to the Main Menu on your GT. Go to the bottom of the menu and choose Update GT Software. • If the Update GT Software option is not available on the Main Menu: - Choose Update GT Firmware. OR - Scroll to the top and choose Change Vehicle, then select your vehicle from the list. Confirm that you want to load the file. Let the GT load the file and reboot.

Do not disconnect it or turn it off during this part of the process. Best drum fills. The GT has now been updated!